Proton ICS-1290 - Number System; Addenda

80
Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. To prevent transmission, scan Off. Default = On.
(9140061.)
* On
Addenda
(9140060.)
Off
This selection adds 2 or 5 digits to the end of all scanned UPC-E data.Default =
Off for both 2 Digit and 5 Digit Addenda.
(9140071.)
2 Digit Addenda On
(9140070.)
* 2 Digit Addenda Off
(9140081.)
5 Digit Addenda On
(9140080.)
* 5 Digit Addenda Off