Proton ICS-1290 - Upc-E0; On;Off

77
UPC-E0
<Default All UPC-E Settings>
(914000.)
Default All UPC-E0 Settings
On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use
the *UPC-E0 On selection. If you need to read codes that lead with the 1number
system, use UPC-E1. Default = On.
(9140101.)
* UPC-E0 On
(9140100.)
UPC-E0 Off