English
25
6. ERROR DISPLAYS
Error Display Cause Measure
USB
MEMORY
DEVICE
DEVICE ERROR Failure detection of USB memory device when it is
plugged into the port.
Unplug the USB memory device and re-plug into the port.
NO FILE No audio le is detected in the media. Replace with audio contents loaded USB memory device.
OVER CURRENT USB connector short circuit/ overloaded. Unplug the USB memory device, turn off the car stereo power
and then turn on the power again.
NO RESPONSE Device no response after 20 sec of le reading. Reduce the number of le in the USB memory device.
USB HUB ERROR USB HUB is connected Unplug the USB HUB and plug in USB memory device into
the port.
Error Display Cause Measure
Bluetooth
®
CALL FAIL Calling is not successful. Please try a few more times or dial from phone if necessary.