English
9
Radio Mode Operations
Listening to the radio
1. Press the [SRC] button and select the Tuner
mode, then the radio will be on.
2. To select a preset band, press the [BAND
]
button, and then select one of the preset
bands such as FM1, FM2, FM3 or AM.
Every time the [BAND
]
button is pressed, the band
switches in the following order:
FM1 FM2 FM3 AM FM1...
3. Press the [ ]/[ ] button to tune in the
desired station.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in
to only broadcast stations with good reception
sensitivity.
1. Press the [BAND] button and select the
desired band (FM or AM).
2. Press the [MENU] button for 1 second or longer
to toggle DX/LOCAL seek. “DX MODE/LO
MODE” will be displayed.
3. Press the [ ]/[ ] button for 1 second or lon-
ger to start automatic station tuning.
DX SEEK
When the [ ] button is pressed and held in
position for 1 second or longer, search will be
performing in the direction of higher frequencies.
When the [ ] button is pressed and held in
position for 1 second or longer, search will be
performed in the direction of lower frequencies.
* When seek tuning starts, “DX SEEK”
appears in the display.
LOCAL SEEK
If the [ ] button is pressed and held in position
for 1 second or longer, search will be performing
in the direction of higher frequencies. When the
[ ] button is pressed and held for 1 second or
longer, search will be performed in the direction
of lower frequencies. Broadcast stations with
good reception sensitivity are selected.
* When local seek starts, “LO SEEK”
appears in the display.
Manual tuning
1. Press the [BAND] button to select the desired
band FM1,FM2,FM3 or AM.
2. Press the [ ]/[ ] button to manually tune in
a station.
Preset memory function
Preset memory function can store up to 24
stations. There are 6 stations for each of FM1,
FM2, FM3 and AM .
Manual memory function
1. Press the [BAND
]
button and select a band
that you want to store in the memory.
2. Press the [ ]/[ ] button to tune into a
desired station.
3. Press and hold one of the [DIRECT
]
buttons for
1 second or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a previously
stored station remains un-overwritten at the
memory position.
1. Press the [BAND
]
button and select the desired
band (FM or AM).
2. Press and hold the [
PS/AS]
button for 1 second
or longer. The stations with good reception are
stored automatically to the preset channels.
“A-STORE” will be displayed.
* Auto store is performed in current band.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the
[PS/AS]
button.
2. When a desired station is tuned in, press the
[PS/AS]
button again to continue receiving
that station. “P-SCAN” will be displayed and “
” indicator lights in the display.
To Next Page
Loading...