Proton Persona Standard 2019 - Page 8

English
8
Note:
• If no operation is performed for more than 7
seconds, the audio mode is cancelled and
returns to the previous mode.
• Bass, Mid and Treble will be hidden when Preset -EQ
other than FLAT is selected.
Adjusting the Preset Equalizer (PRE-EQ)
1. Press the [SOUND] button and select “PRE-
EQ”
2. Pressing the [VOL +/-] button to select the fol-
lowing settings.
“PRE-EQ FLAT” “PRE-EQ POP” “PRE-
EQ ROCK” “PRE-EQ CLASSIC” “PRE-
EQ HIPHOP” “PRE-EQ DANCE” “PRE-
EQ JAZZ” “PRE-EQ H-METAL”
Note:
• The factory default setting is “PRE-EQ FLAT”.
Adjusting the bass
1. Press the [SOUND] button and select “BASS”.
2. Pressing the [VOL +/-] button to emphasizes/
attenuates the bass
“GAIN XX” will be displayed where “XX” is the
value from -7 to +7.
Note:
• The factory default setting is “GAIN 0”.
Basic Operations
Adjusting the mid
1. Press the [SOUND] button and select “MID”.
2. Pressing the [VOL +/-] button to emphasizes/
attenuate the mid.
“GAIN XX” will be displayed where “XX” is the
value from -7 to +7.
Note:
• The factory default setting is “GAIN 0”.
Adjusting the treble
1. Press the [SOUND] button and select
“TREBLE”.
2. Pressing the [VOL +/-] button to emphasizes/
attenuate the treble.
“GAIN XX” will be displayed where “XX” is the
value from -7 to +7.
Note:
• The factory default setting is “GAIN 0”.
Adjusting the balance
1. Press the [SOUND] button and select
“BALANCE”
2. Pressing the [VOL +/-] button to emphasizes
the sound from the right /left speakers. The dis-
play changes as follows:
“RIGHT XX” will be displayed where “XX” is the
value from 1 to 12.
“LEFT XX” will be displayed where “XX” is the
value from 1 to 12.
Note:
• The factory default setting is “CENTER”.
Adjusting the fader
1. Press the [SOUND] button and select
“FADER”.
2. Pressing the [VOL +/-] button to emphasizes
the sound from the front /rear speakers.
The display changes as follows:
“FRONT XX” will be displayed where “XX” is the
value from 1 to 12.
“REAR XX” will be displayed where “XX” is the
value from 1 to 12.
Note:
• The factory default setting is “CENTER”.