Protool CSP 132 E User Manual

17
GB
Hand Circular Saw CSP 132 E
Table of contents
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip
2 Tool Specifi cations
Nominal voltage 230 V ~
Mains frequency 50 / 60 Hz
Power consumption 2300 W
Rated rmp (no load) 2200 min–1
Constant-Electronic •
Smooth start •
Overload protection •
Temperature fuse •
Saw blade ø 350 mm
Hole 30 mm
Tooth width 3.5 mm
Blade thickness 2.5 mm
Cutting depth 60° 0 … 60 mm
45° 0 … 90 mm
Cutting angle 0° … 60°
Weight (without accessories) 16 kg
Protection class II /
1 Symbols .......................................... 17
2 Tool Specifi cations ............................ 17
3 Operating Controls ........................... 18
4 Intended Use .................................. 18
5 Notes on Safety Prevention ................ 18
5.1 General Safety Instructions ............... 18
5.2 Safety Rules for Circular Saws ........... 18
5.3 Additional Safety Rules for all Circular
Saws ............................................. 19
5.4 Specific Safety Rules for CSP 132 E
Circular Saws .................................. 19
5.5 Noise/Vibration Information .............. 20
6 Commissioning and Operation ........... 20
7 Adjustment ..................................... 21
7.1 Electronic Motor Control .................... 21
7.2 Cutting Depth Adjustment ................ 21
7.3 Cutting Angle Adjustment ................. 21
7.4 Cut indicator ................................... 21
7.5 Parallel Guide .................................. 21
7.6 Exhaustion ..................................... 21
7.7 Replacing the Saw Blade .................. 22
8 Operating Instructions ...................... 22
8.1 Working different materials ................ 22
8.2 Two-Man Operation ........................... 23
9 Using Attachments ........................... 23
9.1 NS-CSP 250x50 Planing Attachment ... 23
9.2 RS-CSP 160x80 Curve-Cutting
Attachment ...................................... 23
10 Maintenance ................................... 24
11 Environmental Protection/Disposal ..... 24
12 Warranty ........................................ 24
13 Declaration of Conformity ................. 24

Protool CSP 132 E Specifications

General

Brand	Protool
Model	CSP 132 E
Category	Saw
Language	English