CONNECT
1.) Turn on all capsules
For all capsules, press the multifunction button (4) for 3 seconds. An ascending signal
will sound and the LED (3) will flash 2x red every 3 seconds.
Pairing - existing network
Recommissioning the radio capsules in an existing PROTOS® network.
2.) Incorporate into known network
For all capsules to be connected, press the up button (1) for 2 seconds. The order of the
capsules does not matter.
ATTENTION: If a “Reset” has been carried out since the last coupling, the network must
be recreated. To do this, follow the steps under “Pair - New Network” (page 19).
21
To Next Page
Loading...