EN
DE
9
NL
© Prowise 2018
HAZARD WARNING!
Keep the packaging material, such as plastic foil, away from children.
Improper use of packaging material can result in a suff ocation hazard.
2.3. Installation
PLEASE NOTE!
The installation of the lift and the assembly of the touchscreen on
the Prowise lift should be executed by certifi ed personnel of Prowise.
Please be aware if damage is caused to the lift or touchscreen due to
incorrect assembly by third parties, the warranty will be void.
• The Prowise iPro lift must be installed by Prowise or a certifi ed partner according
to the instructions of the Quick Start Guide of this lift.
• Make sure you are using an earthed wall socket with a voltage of 6A.
• Only plug the power cable into grounded electrical outlets with AC 100-240V
~50/60Hz. If you are not sure about the power supply at the installation location,
consult your energy company.
• Only use the connection cable and plug supplied.
• Avoid contaminated environments and vibrations.
• Do not place objects underneath the lift, as the movement of the lift can be
obstructed by this. The lift is equipped with anti-collision sensors, which will stop
moving as soon as the lift meets resistance. This prevents damage to the lift and
the touchscreen installed on it.
• Only place the lift on a stable and fl at surface.
• Do not install and use the appliance in the vicinity of water and objects that
contain liquid substances. Ensure the connecting cable does not lie in the
walkway to prevent the risk of stumbling over it.
2.4. Ambient Conditions
• The lift can be used at an ambient temperature of +10°C to +40°C (50°F to 104°F)
and a relative humidity of 10% - 90% (no condensation).
• When switched off , the lift can be stored at an ambient temperature between
-10°C and +70°C (14°F to 158°F) and a relative humidity of 10% - 90%
(no condensation).
To Next Page
Loading...
