Tsunami
®
800 and 8000 Series - Hardware Installation Guide 29
2.2.1.2 Grounding Point
To protect the device against lightning or ESD events, you must ground the device properly. To ensure proper grounding, use
the grounding point situated at the bottom corner of the device and the grounding screw (M4 thread size) provided to attach
a ground wire of atleast 12 AWG stranded to the device.
2.2.2 Product Package
Each shipment includes the items listed in the following table. Please verify that you have received all the parts in the
shipment prior to the installation.
: QB-825-LNK-50 contains two sets of all the above accessories.
What’s in the Kit Image
MP-825-CPE-100/
MP-825-CPE-50/
QB-825-EPR-50
PoE Injector with Country
specific Power Cord
WD - US, UK, and EU power cords
US - US power cord
Connector Weather Proofing
Kit
Pole Mounting Kit
Grounding Kit
Quick Installation Guide
To Next Page
Loading...
Need help?
General
