Proxim Tsunami Multipoint MP-820-BSU-100 User Manual

8000 Series - Hardware Overview and Installation
Tsunami
®
800 and 8000 Series - Hardware Installation Guide 87
Figure 3-40 LED Indicators
The following table describes the status of LED:
LED State Ethernet Interface
Power/Ethernet LED Wireless LED
Off No Power Radio is not present or failed to detect
Amber No Application Image detected
(ScanTool mode)
Power is ON and device detects Reload
signal
Blinking Green Power is ON and the Ethernet link is
DOWN
Radio is detected but wireless link has
not been established yet
Solid Green Power is ON and the Ethernet link is UP Radio is detected and wireless link has
been established

Proxim Tsunami Multipoint MP-820-BSU-100 Specifications

General

Brand	Proxim
Model	Tsunami Multipoint MP-820-BSU-100
Category	Wireless Access Point
Language	English