Need help?Do you have a question about the Proxxon DB 250 and is the answer not in the manual?
General| Motor | Electronic speed control |
|---|---|
| Distance Between Centers | 250 mm |
| Swing Over Bed | 100mm |
| Weight | 2.0 kg |
| Center distance | 250 mm |
| Power consumption | 100 W |
| Spindle bore | 10 mm |
| Power Supply | 230 V, 50/60 Hz |
Introduces the PROXXON Micro wood turning lathe DB 250 for small wood workpieces.
Lists electrical and physical specifications of the lathe.
Provides details on noise and vibration emissions during operation.
Emphasizes reading all safety warnings and keeping them for future reference.
Warns about potential hazards like dust, asbestos, and improper handling.
Lists crucial safety steps before and during operation.
Instructions for attaching the machine to a stable wooden board for secure operation.
Details various methods for clamping workpieces and performing turning operations.
Guidelines for maintaining the lathe's condition and longevity.
Information on available accessories and Proxxon's recommendations.
Instructions regarding warranty claims and contacting the dealer for support.
Guidance on environmentally friendly disposal of the device.
To Next Page
