Need help?Do you have a question about the Proxxon PD 400 and is the answer not in the manual?
Weight and Dimensions| Depth | 900 mm |
|---|---|
| Width | 400 mm |
| Height | 300 mm |
| Weight | 45000 g |
Instructions for securely clamping a workpiece in the lathe chuck, noting projection limits.
Procedure for removing and replacing the clamping jaws on the lathe chuck.
Step-by-step instructions for safely starting the lathe, including safety checks.
Procedure for quickly moving the support using the handwheel after disengaging it.
Steps to engage and operate the automatic feed system on the lathe.
Instructions for longitudinal turning using the leadscrew and support.
Procedure for longitudinal turning using the top slide.
Instructions for face turning using the cross-slide.
Instructions for cleaning the machine after use, including safety precautions.
General lubrication and oiling procedures for machine parts and guides.
Instructions for installing and removing the centre turning attachment for longer workpieces.
Refer to operator's manual for instructions on using this chuck.
Refer to operator's manual for instructions on using this chuck.
To Next Page
