support@prxperformance.com 11
Attach Gas Shocks to Wall Brackets
1. *ATTENTION: TEAM LIFT the rack by holding each upright and pushing up against the wall. NOTE:
The rack will be heavy
2. Attach Gas Shocks to ‘ear’ of the wall bracket with the 8M Nylock Nut (3E) - already attached to the
shock - and tighten using two 12mm open-ended wrenches
3. Repeat for all shocks
4. Move the rack from the up position to the down position. It should move with ease. If it feels ‘stiff ‘,
loosen the pivot points slightly until it moves more smoothly
That’s it!
Please send a video or photo of your rack in action to
sales@prxperformance.com when complete.
We would love to see it!
3B
3A
2C
10
3E
To Next Page
