PS Audio AV-3000 - Outlet Labeling

Installation and Operating Instructions
AV-3000 and AV-5000 Power Centers
4826 Sterling Drive, Boulder CO 80301 15-052-21-1 Rev B
PH: 720.406.8946 service@psaudio.com
www.psaudio.com
©2009 PS Audio International Inc. All rights reserved.
2.6.2.1.6 Outlet Labeling
1. Select the outlet you wish to modify by touching the corresponding outlet on
the front panel. Once selected the outlet will begin to flash.
2. Press SELECT and in the LCD window you will see the switch mode begin to
flash. Press SELECT again, you will see the Outlet Label begin to flash. We
are now ready to modify the Outlet Label.
3. Pressing EDIT UP will cycle through the available switch modes as follows
(EDIT DOWN cycles though the same list in reverse order):
Processor,
Receiver
DVD Player
CD Player
Transport
DAC
Tuner
Projector,
Television
Cable TV
Satellite
VCR
DVR
Music Server
Game
Turntable
Phono Amp
Preamp
Integrated
Power Amp
Power Amp #1
Power Amp #2
Power Amp #3
Power Amp #4
Subwoofer
Automation
Router
Modem
Network
Zone # (default)
4. To confirm and save your selection press SELECT while the desired setting
is flashing.