PSG FP700 - Thermostat Features and Benefits; Advanced Performance Technology (AdPt); ServiceWatch Maintenance Monitoring

4
TUE
RETURN
COOL
FANSCHED
ON
MENU FAN MODE
Increases
Temperature
Decreases
Temperature
Selects
Run Mode
Heat, Cool
or Off
Selects
Fan Mode
Constant On
or Auto
Selects
Manual or
Scheduled
Mode,
Sets Time
5
ServiceWatch® monitors the run time hours. It is a program designed to remind
the homeowner to schedule service for the HVAC equipment. The maintenance
period for filter replacement and heating or cooling service is programmable based
on the respective system run times. The control will monitor the run times, and when
the programmed settings are reached the display will show SERVICE and either
FILTER, COOLING or HEATING.
THIS IS NOT AN EMERGENCY, just a reminder.
Example: When the display shows
SERVICE and HEATING it is time to
schedule an appointment to have the
heating system maintained.
THIS IS NOT AN EMERGENCY, just
a reminder.
THU
SERVICE
HEATING
LEAVE
COOL
AUTO
FANSCHED
Advanced Performance Technology (AdPt) allows the HVAC system to gradually
change the temperature from the energy saving setback temperature to the comfort
temperature. AdPt is only available in the event schedule mode. Just program the
desired time and temperature. The thermostat will activate either heating or cooling
at the appropriate time to reach the desired temperature by the correct time.
AdPt is active when the current event indicator (WAKE, LEAVE, RETURN, SLEEP)
is flashing.