2
534 Trestle Place Downingtown, PA, 19335 USA · Tel: +1(484)593-2247 · Email: support@ptzoptics.com
Preface
Before installation and usage, please read the manual thoroughly. If you have any
questions or issues with this process, please contact our Support Team.
Precautions
▪ Do not subject the camera to rain or moisture.
▪ Do not remove the cover. Removal of the cover will void the camera’s warranty and may
cause an electric shock. For any abnormal operation, please contact support@ptzoptics.
com.
▪ Never operate outside of the specied operating temperature range or humidity.
▪ The power supply included in the box is the only power supply to be used with this cam-
era. To purchase a replacement, please visit ptzoptics.com/where-to-buy/.
▪ Please use a soft cloth to clean the unit. If the unit is very dirty, clean it with diluted neutral
detergent; do not use solvents which may damage the surface.
Warning
▪ Electrical safety
Installation must be in accordance with national and local electric safety
standards.
▪ Polarity of Power Supply
The power supply output for this product is 12V DC with a maximum current
supply of 2A. The polarity of the power supply plug is critical and is as follows:
▪ Handling
Ŝ Avoid subjecting the camera to stress, vibration, or moisture during
transportation, storage, installation, and operation.
Ŝ Do not lift or move the camera by grasping the camera head. To avoid
mechanical damage, do not turn the camera head by hand.
Ŝ Do not expose the camera to any corrosive solid, liquid, or gas.
Ŝ Please make sure that there are no obstacles in the pan or tilt ranges of the
camera lens.
Ŝ After installation is complete, power on the camera.
Ŝ Do not dismantle the camera - PTZOptics is not responsible for any
unauthorized modication or dismantling.
To Next Page
Loading...