Need help?Do you have a question about the PTZOptics Move 4K and is the answer not in the manual?
Safety requirements for camera installation and operation.
Guidelines for safe handling, transport, installation, and operation.
Correct DC power plug polarity is critical for operation.
Enables auto-tracking in various scenarios using advanced algorithms.
Details available 12X, 20X, and 30X optical zoom capabilities.
Features a SONY UHD CMOS sensor for high-quality 4K video at 60 FPS.
Supports HDMI, USB, SDI, IP streaming and multiple control methods.
Details specific models, supported resolutions, and frame rates for outputs.
Information on CMOS sensor type, pixels, and lens focal length/aperture.
Details shutter, white balance, backlight compensation, and noise reduction.
Specifies horizontal/vertical fields of view and pan/tilt rotation limits.
Details USB connectivity standards and UVC support.
Covers IP video compression, stream resolutions, bitrates, and protocols.
Lists available physical ports for HD Output and Audio Input/Output.
Details RS232, RS485, and IR communication port specifications.
Includes input voltage, power consumption, size, and weight information.
Shows the dimensions for the 12X and 20X zoom camera models.
Guide for connecting power, line in/out, and serial interfaces.
Explains the resolution dial and identifies key output ports like HDMI and LAN.
Identifies and explains buttons for standby, number input, and camera selection.
Details buttons for pan, tilt, zoom, focus, and home positioning.
Explains functions like auto-tracking, IR address setting, and image freeze.
Navigating the OSD menu and adjusting exposure parameters.
Adjusting white balance, saturation, contrast, and sharpness via OSD.
Configuring PTZ parameters, general setup options, and language.
Configuring communication protocols and restoring default settings.
Details the RS-232 connector, pin assignments, and communication parameters.
Information on RS-485 connection, parameters, and wiring for control.
Steps for connecting the camera to a network switch via LAN.
Methods to locate the camera's IP address using .local or IR remote shortcuts.
Steps for downloading tools, configuring settings, and selecting the camera.
Instructions for logging into the camera's web interface via IP address or .local.
Configuring video encoding protocols, resolution, and bitrate for IP streams.
Settings for audio protocol, sample rate, bitrate, and volume.
Setup for RTMP(S), SRT, RTSP, Multicast, and ONVIF streaming.
Managing camera profiles, logos, custom CSS, and tutorial mode.
Setting IP address, DHCP, and NTP for network connectivity.
Enabling MIDI control, selecting controllers, and mapping commands.
Configuring HTTPS, IR channels, and user access credentials.
Options for checking firmware, uploading updates, and restoring defaults.
Commands issued by the camera for status and completion messages.
Commands for controlling power, zoom, focus, AF sensitivity, WB, gain, etc.
Commands to query camera status and parameters.
Commands for controlling the camera using the Pelco-D protocol.
Commands for controlling the camera using the Pelco-P protocol.
Guidelines for cleaning the camera body and lens.
Solutions for problems like no image, shaky video, or settings changes.
Steps to resolve problems with the IR remote not controlling the camera.
Troubleshooting steps for RS-232/RS-485 and network control problems.
General| Tilt Range | -30° to +90° |
|---|---|
| Digital Zoom | 16x |
| Resolution | 4K |
| Optical Zoom | 12x |
| Pan Range | +/-170° |
| Minimum Illumination | 0.5 Lux (Color), 0.1 Lux (B/W) |
| Day/Night | Yes |
| Video Output | HDMI, IP |
| Audio | Line in/out |
| Control | RS-232, RS-485, IP |
| Power | 12VDC |
To Next Page
