PTZOptics Move 4K - Page 45

44
™
534 Trestle Place Downingtown, PA, 19335 USA · Tel: +1(484)593-2247 · Email: support@ptzoptics.com
• LAN Settings
Ŝ IP Conguration Type: Select whether the camera automatically congured
the network settings (DHCP) or whether you manually congure the network
settings (Static).
Ŝ IP Address: The IP address is a unique address the network uses to connect
and congure the camera.
Ŝ Subnet Mask: The Subnet Mask is a set of numbers that denes how large
your network is.
Ŝ Gateway: The Gateway is the address associated with your router to connect
to the internet.
Ŝ DNS Address: The DNS address is a unique IP address the camera will query
when trying to reach a specic website.
Ŝ MAC Address: The MAC Address is a unique address the Ethernet port utilizes
to communicate with the network. You cannot change this address.
Ŝ DHCP Timeout: DHCP Timeout is the amount of time the camera will try to
acquire an IP address through DHCP. After 30 seconds, the camera will
revert to the Static Fallback Address & Static Fallback Mask. You cannot
change this timeout.
Ŝ Static Fallback Address: Static Fallback Address is the IP address the camera
will revert to if one cannot be acquired automatically. You cannot change this
address.
Ŝ Static Fallback Mask: Static Fallback Mask is the Subnet Mask the camera will
revert to if one cannot be acquired automatically. You cannot change this
subnet mask.
• NTP Settings
Ŝ NTP Time Sync: Toggle Network Time Protocol (NTP) on or o.
Ŝ NTP Time Zone: Select your time zone.
Ŝ Server Address: Dene the NTP Server Address you wish to utilize.
Ŝ Time Interval: Dene how frequently NTP queries the server (in seconds).