To
stop
and
park
Release the throttle and simultaneously apply both brakes
to stop.
Turn off engine with stop switch.
Close fuel valve.
Rest moped
on
stand and lock.
Securing
your
moped
(See page
9)
A high security locking device
is
recommended. See your
PUGH
dealer for advice.
WARNING
After the engine has been run, the exhaust pipe and muffler
will
become hot, avoid contact with them.
CAUTION
Two lenghts of screws are used to secure the chain guards.
Ensure that
only the shorter version
is
used
on
the left rear
bracket. Longer screw
will protrude too far through the bracket
and
possible damage the rear tire.
19
To Next Page
Loading...
