18
Throttle
The speed of the moped
is
controlled with a twist grip on the
right side
of
the handlebar.
To
accelerate twist the throttle towards
you; to decelerate
release slowly.
Note:
Depending on engine RPM,
clutch will engage or disengage
automatically on the one speed
model.
In
addition, shifting into or from 2. gear, depending on engine
RPM and road speed,
will occur automatically
on
the two speed
mode
II
.
Braking
To slow down, release the throttle control and apply equal pull
to both brake levers. Application of both brakes at the same time
is
essential to prevent premature brake wear and/or loss of
vehicle control.
CAUTION:
Be
alert when riding on wet or sandy surfaces. Loss
of friction between tire and road can occur under these conditions.
Be
careful when braking, turning or accelerating under adverse
conditions.
To Next Page
Loading...
