Pullman WD60LSSO - Assembly

ASSEMBLY
1. Disconnect latches on side of machine and remove the canister lid. Remove all
accessories from inside the tank. Replace the canister lid (with the power cord facing the
opposite direction of the hose inlet) and connect the latches.
a. Pin
b. Washer
c. Wheel
d. Washer
e. Trolley
f. Washer
g. Clamp
Rear wheel
a
b
c
e
d
f
g
Handrail
tube
Bottom
frame
Small castor wheel
Star grip
knob (M8)
5
PULLMAN 60L WET & DRY VACUUM WITH OUTRIGGER WD60LSSO