The Pullman CB60 is a 60L wet and dry vacuum cleaner designed for quality cleaning solutions in various commercial and industrial settings. It operates at 2000W and is suitable for shops, garages, motels & hotels, and restaurants & cafes.
Function Description
The CB60 is a versatile vacuum cleaner capable of handling both wet and dry applications. It features a powerful 2000W motor, providing strong suction for effective cleaning. The vacuum is equipped with a 60L tank, allowing for extended cleaning sessions without frequent emptying. It comes with a range of accessories tailored for different cleaning tasks, including a dry pick-up floor tool for hard floors, a wet pick-up tool for liquid spills, a crevice tool for tight spaces, and a dusting brush for furniture and upholstery. The vacuum cleaner is designed for ease of use, with clear instructions for assembly, operation, and maintenance.
Important Technical Specifications
- Model: CB60
- Voltage: 220-240V ~ 50Hz/60Hz
- Function: Wet & Dry
- Cooling Mode: Cycle
- Vacuum: 250mbar
- Volume: 60L
- Power: 2000W
- Airflow: 106L/S
- Barrel Body Diameter: 440mm
- Accessories Diameter: 40mm
- Cable Length: 8m
- Noise Level: <75DB
- Net Weight: 24.5KGS
Usage Features
The Pullman CB60 is designed for straightforward operation. Before using the vacuum cleaner, it is crucial to ensure that the appropriate filter is in place for either wet or dry vacuuming. For dry vacuuming, the cloth filter should be securely fitted. For wet vacuuming, the cloth filter must be removed.
Assembly:
- Connect the two-piece metal tube together.
- Connect the handle on the hose to the assembled tube.
- Attach the desired cleaning accessory (e.g., dry pick-up tool, wet pick-up tool, crevice tool, dusting brush) to the tube.
- Connect the hose to the Pullman CB60 unit at the hose inlet.
Dry Vacuuming:
- Ensure the connection latches are released to remove the canister lid.
- Fit the cloth filter bag securely in place.
- Replace the canister lid and secure the connection latches.
- Turn the vacuum cleaner switch to position "I".
- The suction can be adjusted by using either one or two motors, controlled by switches on the front of the unit.
- Empty the dust tank or dust bag when it's full or after each use.
- The cloth filter needs to be cleaned accordingly.
Wet Vacuuming:
- Ensure the cloth filter is removed before using the cleaner for wet applications.
- Turn the vacuum cleaner switch to position "I".
- Adjust suction by selecting one or two motors using the front switches.
- Empty the tank via the drain hose after each use. Avoid leaving dust or dirty water in the tank.
- Wet pick-up accessories should be washed periodically.
Accessories:
- Dry Pick Up Floor Tool: Ideal for vacuuming hard floors. Not suitable for carpets.
- Wet Pick Up Floor Tool: Ideal for wet applications and liquid spills.
- Dusting Brush: Used for cleaning furniture, curtains, and upholstery.
- Crevice Tool: Designed for cleaning in tight and narrow spaces.
- 2 Piece Metal Tube: Extends reach for various cleaning tasks.
Safety Precautions:
- Always switch off and unplug the cleaner from the power supply before cleaning, maintenance, or changing accessories.
- Do not operate the appliance if the power cord or plug is damaged.
- Do not use the appliance to pick up hot water/liquids, flammable items, or combustible liquids.
- Do not use the appliance to pick up toxic materials (e.g., chlorine bleach, ammonia).
- Ensure the appliance is disconnected from the main power supply before connecting the hose to the unit.
- Do not operate or use the appliance without dust bag and/or filters in place while dry vacuum cleaning.
- Before vacuuming, remove any large or sharp objects from the floor or cleaning surface to prevent damage to the filter.
- Do not leave the appliance unattended when it is connected to a mains power supply.
- Before carrying out any maintenance service or cleaning the filters, always switch off the vacuum cleaner and disconnect the plug from the power supply.
- Keep the ends of the hose, telescopic tube, and other openings away from your face and body.
- Do not use the vacuum cleaner if it is damaged or breaks down. Check the electrical cable regularly for defects. If cables, hose, electrical contacts, and/or metal tubes are damaged, have them replaced immediately.
- Wet pick-up accessories should be washed periodically.
Maintenance Features
Regular maintenance is crucial for the longevity and optimal performance of the Pullman CB60.
General Maintenance:
- Disconnect Power: Always disconnect the cleaner from the mains power supply before performing any maintenance work.
- Cleaning the Canister Lid: Release the connection latches to remove the canister lid.
- Cloth Filter: For dry vacuuming, the cloth filter should be removed, washed under lukewarm water, and air-dried for at least 24 hours before re-installation. If the filter is clogged or its condition continues to worsen, it should be changed.
- Tank Cleaning: Empty the tank after each use, especially after wet vacuuming, to prevent the accumulation of dust or dirty water. Wipe the machine inside and out with lukewarm water periodically.
- Power Cable: Regularly examine the power cable for cuts and/or damage.
- Accessories: Wet pick-up accessories should be washed periodically.
- Saturated Filter: If misting occurs in the exhaust air, replace the saturated filter and the filter mesh.
Troubleshooting:
- Suction weakens or cleaner runs hot:
- Clogged filter: Brush dirt from the filter. If the condition continues, change the filter.
- Air leak: Check all fittings (floor tool, hoses, etc.) for a tight fit. Ensure the tank cover is sealed properly.
- Obstruction in hose or floor tool: Check the floor tool, hose, etc., for obstructions and remove them if present.
- Misting in the exhaust air:
- Saturated filter: Replace the saturated filter and the filter mesh.
Warranty:
The Pullman CB60 comes with a one-year parts and labor warranty against product defects and failures when used in accordance with the terms and conditions of the warranty statement. The warranty does not cover accessories and consumables unless defective in manufacture. Misuse, failure to follow instructions, alterations, improper installation, physical abuse, or accidental damage will void the warranty. For service or advice, contact Electrical Home-Aids Pty Ltd.
Need help?
General
To Next Page
