EasyManua.ls Logo

Pullman CB60 - Specifications; Troubleshooting

Pullman CB60
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE REMEDY
Suction weakens or
cleaner runs hot
Clogged filter Brush dirt from filter. If condition
continues, change filter.
Air leak Check all fittings for tight fit (floor tool,
hoses, etc.). Check that tank cover is
sealed properly.
Obstruction in hose
or floor tool
Check floor tool, hose, etc. for
obstructions, and remove if present.
Misting in the exhaust air Saturated filter Replace saturated filter and the
filter mesh.
Voltage: 220V-240V 50Hz/60Hz
Function: Wet & Dry
Cooling Mode: Cycle
Vacuum: 250mbar
Volume: 60L
Power: 2000W
Airflow: 106L /S
Barrel body diameter: 440mm
Accessories: 40mm
Cable: 8m
Noise: <75DB
Net Weight: 24.5KGS
10

Related product manuals