OPERATION
Closed
Fit in Place
Before turning on the Pullman CB60 Vacuum Cleaner,
please check that the Drain Hose is secure to the tank
and the cap is fully closed.
2. Ensure the cloth filter bag is always installed before
dry use.
3. Turn the switch of the vacuum cleaner to position “I”.
4. You can determine the suction by using either 1 or 2
motors. Each motor is controlled by a switch located
on the front.
5. Empty the dust tank or dust bag when it’s full or after
each use.
6. The cloth filter also needs to be cleaned accordingly.
IMPORTANT: DISCONNECT THE CLEANER BEFORE CHANGING ACCESSORIES OR TO
EMPTY THE CLEANER.
Dry Vacuum Cleaning
1. Release the connection latches to remove the
canister lid.
7PULLMAN 60L WET & DRY CB60
To Next Page
Loading...
