EasyManua.ls Logo

PullRite SuperGlide 2900 - Frequently Asked Questions

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 14
1. Can I pull other Fifth wheel trailers with my SuperGlide hitch?
Your SuperGlide hitch can only pull trailers equipped with the SuperGlide Capture Plate. If you hook up
to a trailer that does not have a Capture Plate installed, there is no control to keep the hitch in the forward
towing position and the weight of the trailer will cause the head to turn and slam or “free fall” to the rear
of the hitch’s angled cam slot, which may cause damage to the hitch, truck, and the king pin. We do not
recommend locking the hitch in any way to keep it in the forward position.
2. Will a standard hitch be able to tow my trailer with the Capture Plate installed?
The Capture Plate will need to be removed from the pin box before a standard fth wheel hitch can tow
your trailer. If the plate is not removed, the king pin will not rotate in the hitch and damage will result to
the Capture Plate and conventional hitch. Part # 3336 is a conversion adapter (see pg. i) that will allow
a standard fth wheel hitch to tow your trailer with the Capture Plate installed. The adapter is used in
conjunction with your Fifth Wheel Plate, or “head” of the SuperGlide {A}.
3. Is there a cover available for my SuperGlide hitch?
Yes. It is part #2912 and is available from your RV Dealer or by calling Customer Service (not available for
#2300 SuperGlide at this time).
4. Can I put a bed liner in my truck after the hitch is installed?
The industry standard base rails can be installed over a spray-in bed liner. All other liners will require an
opening to be cut through the liner, to allow the base rails to install against the metal of the bed.
5. How much does my SuperGlide weigh?
#2700 -- 194 lbs.
#2900 -- 224 lbs.
#2300 -- 270 lbs.
6. Can I leave the hitch attached to my trailer and use the trailer jacks to lift the hitch out of the truck?
Yes, you can use the trailer jacks to lift the hitch out of the truck. The hitch should not however be left
hanging from the king pin. Once you have the hitch lifted out of the truck you should have a stand available
to lower the hitch onto for storage.
FREQUENTLY ASKED QUESTIONS

Related product manuals