i
MANUFACTURED BY:
PULLIAM ENTERPRISES, INC.
13790 East Jefferson Blvd.
Mishawaka, IN 46545
(574) 259-1520 • (800) 443-2307
info@pullrite.com • www.pullrite.com
When your trailer’s king pin box has been equipped with any welded Capture Plate or bolted-on Universal Capture Plate, this adapter will allow
your trailer to be pulled by a non-SuperGlide hitch when used in conjunction with the head of your SuperGlide (sold separately #3336).
NOTE: Most SuperGlide customers elect to use a custom, removable capture plate, rendering this adapter unnecessary.
1. Remove the SuperGlide Fifth Wheel
plate (part# 3601) from the SuperGlide
hitch by removing both 1/2” x 2” clevis
pins (part #98410111) and pin clips
(part #98410127).
2. Slide the SuperGlide Conversion Adapter
onto the 5th wheel plate of the “brand X”
hitch as seen in Step 1, making certain the
Conversion Adapter is securely locked into
place.
3. Insert the SuperGlide Fifth Wheel Plate (your
SuperGlide hitch head) into the Conversion
Adapter “cradles,” and secure with the
1/2” x 2” clevis pins and clips.
4. The Conversion Adapter allows the king pin
to turn in the conventional style hitch when
hooked up to the trailer equipped with a
SuperGlide Capture Plate.
NOTE: Hook-up must be performed in a
straight line.
#3336 Conversion Adapter
Step 3
SuperGlide
Trailer Plate
Step 1
Conversion Adapter
Step 2
pin clip
clevis pin
3601 SuperGlide
Fi h wheel plate
#3336 SG Conversion Adapter Instructions (rev. 10.1.14)
#3336 CONVERSION ADAPTER
To Next Page
Loading...
