Need help?Do you have a question about the Pulnix TM-6EX and is the answer not in the manual?
Details the pinout and functions for the 12-pin connector on cameras.
Details the pinout and functions for the 6-pin connector on cameras.
Describes the 8-position BCD switch unit for controlling exposure time.
Information on available power cables with PC-12P female connectors.
Details PULNIX's 2/3 inch format mini lenses and C-mount compatibility.
Lists recommended PULNIX power supply models for the cameras.
Initial checks and recommendations for setting up the camera system.
Instructions for connecting the power supply and cable to the camera.
Guide to connecting the camera's video output to monitors or VCRs.
Procedure for mounting, focusing, and setting up auto-iris lenses.
How to connect and use the SC-745 shutter controller with the camera.
Explanation of how to select shutter speeds using BCD control.
Details the shutter mechanism and its operation principle.
Information on TTL level sync and buffered pixel clock outputs.
Explains the basic photoelectric conversion, accumulation, and transmission of charge in a CCD.
Details the vertical and horizontal charge transfer mechanisms in the CCD.
Presents the relative sensitivity of the CCD sensor across different wavelengths.
Explains the two scanning modes (Field and Frame) and their settings.
Procedure for adjusting the Sync Gen board and its jumper settings.
Steps for connecting and adjusting the Processor board, including voltage settings.
Procedure for connecting and adjusting the Imager board, including Vsub voltage.
Details factory settings for AGC/MGC, Gamma, and Field/Frame modes.
Specifications for external sync signals (HD, VD) and input impedance.
Details pin configurations for TM-7EX/TM-6EX connectors.
Explains the standard asynchronous reset feature and its benefits.
Procedure for adjusting horizontal and vertical phase lock.
General| Brand | Pulnix |
|---|---|
| Model | TM-6EX |
| Category | Security Camera |
| Language | English |
To Next Page
