Pulsar Axion Compact XM30F - Page 47

Turn on the wireless module in the  Wi - Fi Activation menu option .
Wi - Fi is displayed in the status bar as follows :
Indication on the status bar Connection Status
Wi - Fi is switched off
Wi - Fi connection is in progress
Wi - Fi is switched on , no connection with device
Wi - Fi is switched on , device connected
The device is recognized by an external device as AXION _ XXXX where XXXX are
the four last digits of the serial number .
After entering the password  on a mobile device ( see  Password Setup  subsection of
the  Wi - Fi Settings section for more information on setting a password ) and setting
up a connection , the icon in the status bar will change to .
The Wi - Fi function will turn off automatically if there is not enough battery power for
Wi - Fi . The battery icon will turn red
and flash . To use the Wi - Fi function again , you need to charge the battery .
Stadiametric Rangender