EasyManuals Logo

Pulsar Forward FN135 User Manual

Pulsar Forward FN135
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Check
Corrective action
Problem
The unit will not
focus.
The unit is wrongly adjusted. Adjust the unit according to the
instructions given in the
Section “OPERATION” and
check the surfaces of the
eyepiece and objective lenses
and clean them if necessary
from dust, condensation, frost,
etc; to prevent fogging in cold
weather, apply a special anti-
fog solution.
Wireless remote
control will not
operate.
Remote control is not
activated.
Low battery.
Activate the remote control
according to instructions.
Install a new CR2032 battery.
Smartphone or tablet
PC cannot be
connected to the
unit.
Password in the unit was
changed.
Delete network and connect
again inserting the password
saved in the unit.
Poor image quality /
Detection range
reduced.
Problems described may arise in adverse weather conditions
(snow, rain, fog etc.).
Barely visible texture
which does not
hinder detection
range or efficiency of
observation can be
noticed on the
display after the
extra laser IR
Illuminator (AL915)
is activated.
This is normal for eye safe
laser IR illuminators.
This is not a defect.
The clamp of the
adapter cannot be
opened.
Wrong insert is chosen. Choose the appropriate insert.
Check the gap between the lips
of the adapters.
To ensure stable Wi-Fi
performance, move the unit to
an area with few or no Wi-Fi
networks.
There are too many Wi-Fi
networks in the area where
the unit is located which may
cause signal interference.
26
25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Forward FN135 and is the answer not in the manual?

Pulsar Forward FN135 Specifications

General IconGeneral
BrandPulsar
ModelForward FN135
CategoryMonocular
LanguageEnglish

Related product manuals