Pulsar KRYPTON 2 - Page 10

The battery should be charged at an ambient temperature of 0 ° C …35 ° C 32
° F …95° F . Otherwise , lifespan of the battery will decrease significantly .
When using the battery at sub - zero temperatures , the battery capacity decreases ,
this is normal and not a defect .
Do not use the battery at temperatures outside the range of 25 ° С …50 ° С 13
° F …122 ° F  – this may reduce battery ʼ s life .
The battery has a short - circuit protection . However , any situation that may cause
short - circuiting should be avoided .
Battery Charging
The device is supplied with a rechargeable IPS 7 Lithium - ion Battery Pack which allows
the attachment to be used for up to 11 hours . Charge the battery before first use .
The icon  in the status bar will flash when the battery is low . The battery needs to be
charged .
Option 1
 Install  the IPS 7 battery  4  in the battery compartment  of the device .
 Connect the USB Type - C cable  20  to the USB Type - C connector  10  of the
device .