Pulsar KRYPTON 2 - Page 25

adjusting the microbolometer sensitivity level will help to achieve the desired quality in a
particular situation .
Warning !  Never point the lens at intensive energy sources such as laser radiation
emitting devices or the sun . It can damage electronic components in the device . The
warranty does not cover damage arising from failure to comply with operating
instructions .
Button Operation
Operation Button
Power device on
short press
Power device off
long press for 3 secs
Turn display o ff
long press for less than 3 secs
Turn display on
short press
Calibrate the microbolometer
short press
Switching amplification levels
short press
Interface resizing
long press
Video recorder Button
Start / pause / resume video recording
short press
Stop video recording
long press
Switch to video / photo
long press
Capture Photo
short press
Main Menu Button
Enter main menu long press
Navigation down / clockwise
short press
Navigation up / counter - clockwise
short press