Pulsar KRYPTON 2 - Page 24

 Open the lens cover  1 .
 Turn on the attachment by pressing the  ON / OFF 8  button .
 If necessary , adjust the reticle sharpness according to the instructions for your
riflescope .
 Rotate the lens focus knob  9  to focus on the visual target .
 Enter the main menu with a long press of the  MENU 6  button and select the
desired  calibration mode : manual   M  , semi - automatic   SA   or automatic   A  .
 Calibrate the image by briefly pressing the  ON / OFF 8  button . Close the lens cover
when calibrating manually .
 Select the required amplification level ( “ Normal ” , “ High ” , “ Ultra ”
)
by briefly pressing the  MODE 7  button .
 Activate the smoothing filter in the main menu to improve the image as the
amplification level increases .
 Select one of the  colour palettes  in the main menu .
 Activate the quick menu by briefly pressing the  MENU 6  button to adjust the
brightness and contrast of the display ( for more details , see the  Quick
Menu  section ).
 At high optical magnification , interface elements may be partially or completely
invisible . To change the size of the interface , press and hold the  DOWN / MODE
7  button .
 Upon completion of use turn the device off by a long press of the  ON / OFF
8  button .
Observation conditions :  time of day , weather , type of observation objects affect the
image quality . Custom settings for brightness , display contrast as well as the function of