Pulsar KRYPTON 2 - Page 49

 Select the  Bluetooth submenu with the  UP 5/ DOWN 7  buttons .
 A short press of the  MENU 6  button opens the submenu .
 Turn Bluetooth on / off with a short press of the  MENU 6  button .
 Press and hold down the  MENU 6  button to exit the submenu .
The process of connecting the wireless remote control is described in the  Remote
Control Activation  section .
Calibration Mode
Calibration mode selection .
Calibration enables the device to equalize the microbolometer background temperature
and eliminate the image flaws ( such as vertical bars , phantom images , etc .).
There are three calibration modes : Manual , Semi - Automatic  and  Automatic .
The selected calibration mode is displayed in the status bar ( see  Status Bar  section ).
Select the required mode in the Calibration Mode menu item :
 Press and hold the  MENU 6  button to enter the main menu .
 Use the  UP 5/ DOWN 7  buttons to select the  Calibration Mode icon .