Pulsar KRYPTON 2 - Page 63

Technical Maintenance and Storage
Maintenance should be carried out at least twice a year and include the following steps :
Wipe the exterior metal and plastic surfaces with a cotton cloth to remove dust and
dirt . To avoid damage to the paint coating , do not use chemically active substances ,
solvents , etc .
Clean the electrical contacts of the rechargeable battery on the device using a non -
greasy organic solvent .
Check the eyepiece and the lens and if required remove dust and dirt from the
optics ( preferably using a non - contact method ). Cleaning of the exterior surfaces of
the optics should only be done with products specifically designed for this purpose .
Always store the device in its carrying case in a dry , well - ventilated space . For
prolonged storage , remove the batteries .
Troubleshooting
For technical support please contact  support @ pulsar - vision . com .
Answers to frequently asked questions about the devices can also be found in
the  FAQ  section .
The device does not turn on
Possible cause
The battery is completely discharged .
Solution
Charge the battery .