Pulsar KRYPTON 2 - Page 69

The smartphone or tablet is beyond reliable Wi - Fi range . There are obstacles between
the device and the signal receiver ( e . g . concrete walls ).
Solution
Move the devices in line - of - sight and within range of the Wi - Fi signal .
More information on solving problems with connection to Stream Vision 2 by following
the link .
When the device is used in low
temperature conditions the image quality
is worse than in positive temperatures.
Possible cause
In positive temperature conditions , objects being observed ( surroundings and
background ) heat up differently because of thermal conductivity , thereby generating a
high temperature contrast . Consequently , the image quality produced by the thermal
imager will be better .
In low - temperature conditions , objects being observed ( background ) will cool down to
roughly the same temperature , which leads to a greatly reduced temperature contrast
and a degraded image quality . This is normal for all thermal imaging devices .
Residual horizontal lines and traces of
horizontally placed objects during
observation process.
Possible cause
Algorithms that are used for image processing might sometimes cause traces of
horizontal lines to temporarily appear on the image . This should not be considered as a