Pulsar KRYPTON 2 - Page 68

Possible cause
Device password has been changed .
Solution
Delete the network and connect again using the password saved in the device .
Possible cause
The device is in an area with too many Wi - Fi networks that may be causing signal
interference .
Solution
To ensure a stable Wi - Fi connection , relocate the device to an area with fewer or no Wi -
Fi networks .
Solution
Switch  the device ʼ s Wi - Fi bandwidth .
Possible cause
The device has a 5 GHz network enabled , but the smartphone only supports 2.4 GHz .
Solution
Switch  the device ʼ s Wi - Fi bandwidth to 2.4 GHz .
More information on solving problems with connection to Stream Vision 2 by following
the  link .
Missing or interrupted broadcasting via Wi-
Fi
Possible cause