Pulsar KRYPTON - Page 12

 Insert the battery 5 into the slot designed for it on the attachment body so that the
element  D  is pointing downwards .
 Lock the battery in place by raising the lever 4 .
External power supply
External power is supplied from an external source , such as a 5 V Power Bank .
 Attach the external power source to the USB connector 11 on the device .
 The device will switch to operation from the external power supply , while the IPS 7
battery will be gradually recharged .
 A battery icon 
will appear on the display showing charge level as a percentage .
 If the device is operated from an external power source and the IPS 7 battery is not
connected , an icon