Pulsar KRYPTON - Page 17

Microbolometer calibration
Calibration enables the device to equalize the microbolometer background temperature
and eliminate the image flaws ( such as vertical bars , phantom images , etc .).
During calibration , the image on the display briefly freezes for up to 1 second .
There are three calibration modes : Manual  M  , Semi - Automatic  SA  and Automatic
 A  .
Select the required mode in the Calibration Mode
menu item .
M mode  Manual .
Close the lens cover .
Press the ON / OFF 9 button briefly .
Open the lens cover after the calibration is completed .
SA mode  Semi - Automatic ).