Pulsar KRYPTON - Page 18

Press the ON / OFF 9 button briefly to activate calibration .
There is no need to close the lens cover because an internal shutter covers the
microbolometer automatically .
A mode  Automatic ).
The device is calibrated autonomously according to firmware algorithms .
There is no need to close the lens cover because an internal shutter covers the
microbolometer automatically .
In this mode , the user can still choose to calibrate the device using the ON / OFF 9
button if required ( as in the SA mode ).
In Automatic calibration mode a countdown timer will appear instead of the
calibration mode icon 3 seconds before automatic calibration begins .
Installing Pulsar 5X30 B monocular on to
the attachment