Pulsar KRYPTON - Page 19

The Pulsar 530 B monocular ( available separately ) allows you to transform the
attachment into a hand - held thermal imager with 5 x magnification .
 Align the tabs on the monocular with the slots of the mount 20 .
 Turn the monocular clockwise to secure it on the thermal imaging attachment .
 To remove the monocular , turn it counterclockwise and disconnect from the
attachment .
Notes :
The monocular can be installed on a thermal imaging attachment with an adapter
already installed . The Ring Adaptor must be mounted onto the mounting area 20 of
the attachment until it stops .
The monocular can be installed on the device with an adapter installed only if the
original PSP adapter is installed . This may not be possible when using an adapter
from other manufacturers .
The single - point neck strap ( available separately ) can be used with the monocular .
Mounting attachment on optical riescope
1. Remove the eyepiece cover 2 .