Pulsar Merger LRF User Manual

Firmware Update
1.
Download free Stream Vision 2 App inGoogle Play orApp Store.
2.
Connect your Pulsar device to your mobile device (smartphone or
tablet).
3.
Launch Stream Vision 2 and go to section “Settings”.
4.
Select your Pulsar device and press “Check firmware update”.
5.
Wait for the update to download and install. Pulsar device will reboot
and will be ready to operate.
Important:
if your Pulsar device is connected to phone, please turn on mobile data
transfer (GPRS/3G/4G) to download update;
if your Pulsar device is not connected to your phone but is already listed
in “Settings” > “My devices” section, you may use Wi-Fi to download
update.
Find answers to frequently asked questions about using Stream Vision 2
here.

Pulsar Merger LRF Specifications

General

Waterproof	IPX7
Range Finder	Yes
Range Finder Accuracy	± 1 m
Laser rangefinder wavelength	905 nm
Battery Type	Li-ion
Operating temperature	-20°C to +50°C