Dual time setting
1. Pull out the crown to the first click.
2. Turn the crown clockwise or counterclockwise to set the dual
ti
me hand.
* Please make sure that AM/PM of the dual time is correctly
set.
3. Push the crown back in to the normal position.
* While the crown is kept at the first click, the hands stop, and
when the crown is pushed back to the normal position, the
hands move and catch up with the current time.
•
Turn the crown to set the mode indicator to “(((•SET”.
The hour, minute and 24-hour hands move to indicate the alarm
time set previously.
1. Pull out the crown to the second click.
2. Press “A” or “B” repeatedly but separately to set the hour,
minute and 24-hour hands.
* All of the three hands are mechanically engaged and can be
set at the same time.
* The hands move quickly if the button is kept pressed.
* Please make sure that AM/PM of the alarm time is correctly
set.
3. Push the crown back in to the normal position.
The alarm is set to ring at 7:00 AM.
ALARM
The alarm can be set on a 24-hour basis in one-minute increments.
Alarm setting
To Next Page
Loading...
Need help?
General
