Pulsar NS 150 User Manual

2. Service Reminder Reset ( ) :
• ‘Wrench’ symbol glows when ODO meter reading
reached to set Kms.
This icon will glow at-
st nd
1 : 450 Kms 2 : 4450 Kms
rd th
3 : 9450 Kms 4 : 14450Kms
& subsequently at each 5000 Kms.
1. Trip Meter Reset :
• Mode & Set push button is provided for selecting &
resetting ‘ODO/TRIP1/TRIP2’. LHS part of speedo
console.
1.
Press 'Mode' button
for less than 2 sec.
Press 'Mode' button
for more than 15 sec.
Mode changes from
‘ODO/TRIP1/TRIP2’
Selected mode
‘TRIP1/TRIP2’ will get reset.
Other TRIP mode will
continue updating.
2.
Note : Engine & motorcycle speed should be zero.
Speedometer Setting
11
M
S
Mode
Service Reminder
TRIP1/2
Set

Pulsar NS 150 Specifications

General

Displacement	149.5 cc
Compression Ratio	9.8:1
Fuel System	Carburetor
Cooling System	Air Cooled
Transmission	5-speed
Clutch	Wet Multi-plate
Front Tyre	80/100 - 17
Rear Tyre	100/90 - 17
Length	2012 mm
Height	1060 mm
Seat Height	805 mm
Kerb Weight	144 kg
Engine Type	Single cylinder, 4-stroke, SOHC
Maximum Power	14 PS @ 8500 rpm
Ignition	CDI
Front Suspension	Telescopic
Rear Suspension	Monoshock
Front Brake	Disc 240 mm
Rear Brake	Drum 130 mm
Fuel Tank Capacity	12 L