The control panel
The Smasher's control panel is inspired by the « blue stripe » version of a famous
hardware machine, but with a reduced number of controls.
Bypass
The Bypass switch toggles between the sound processed by the plug-in (Active mode) and
the unprocessed input sound (Bypass mode).
The Bypass switch
Input
The Input knob adjusts the gain that is applied to the input signal from -24 dB to +24 dB.
This parameter must be chosen according to the sound level of the track you are
processing, and according to the desired effect. The higher this gain, the greater the
effects of compression and saturation (or even distortion) will be.
Pulsar Smasher – User Manual v1.0 – page 12/16
To Next Page
Loading...