Pulsar TELOS - Page 51

 Press the  MENU 11  button briefly to turn the LED indication on / off .
Default Settings
Factory reset
 Press the  MENU 11  button briefly to enter the  Default Settings menu item .
 Use the  UP 10/ DOWN 12  buttons to select Yes to restore default settings or  No  to
cancel .
 Confirm your selection with a short press of the  MENU 11
If  Yes  is selected , display will show “ Do you want to restore default
settings ?”  with  Yes  and  No  dialogue options . Select  Yes  to restore the default
settings .
Selecting the  No  option will cancel the reset and exit the submenu .
The following settings will be returned to their defaults before being changed by the
user :
Video Recorder Mode – Video
Amplification Level – Normal
Smoothing Filter  – Off
User Mode  – Off
Calibration Mode – Automatic
Language – English
Microphone – Off
Wi - Fi – Off ( unique password )
PiP – Off
Colour Mode – White Hot
Units of Measure – Meters
Video Compression – Off
Wi - Fi Band – 2.4 GHz
Display dimming – Off
Haptic vibro indication – On
LED indication – On
Auto shutdown if device inactive for 30 min  – On
Attention ! When restoring the factory defaults the date , time and user pixel map are
saved .
Format