Pulsar V657 - Adjusting Chronograph Hand Position

English
4
● Before setting the time, be sure to check that the CHRONOGRAPH hands are in
“0” position when the chronograph is reset. (For resetting the chronograph, see
“CHRONOGRAPH” on page 6)
ADJUSTING CHRONOGRAPH HAND POSITION
* If any of the CHRONOGRAPH hands do not return to “0” position, follow the
procedure below to reset the hands.
Pull out to second click.CROWN
CROWN
Push back in to normal
position.
B
A
CROWN
Press repeatedly to reset
CHRONOGRAPH 1/10-
second hand to “0” position.
B
Press repeatedly to reset
CHRONOGRAPH second
and minute hands to “0”
position.
A
▲
▲
▲