English
9
ADJUSTING CHRONOGRAPH HAND POSITION
● The “0” position of the CHRONOGRAPH 1/10-second hand differs depending on the
models.
NOTES ON OPERATING THE WATCH
● The CHRONOGRAPH minute hand moves correspondingly with the CHRONOGRAPH
second hand.
● The hands move quickly if the respective buttons are kept pressed.
TIME/CALENDAR SETTING
● Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not
change properly.
● When setting the hour hand, be sure to check that AM/PM is correctly set. The watch
is so designed that the date changes once in 24 hours.
* Turn the hands past the 12 o’clock marker to determine whether the watch is set for
the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If
not, the time is set for the P.M. period.
* Some models have the “0” position of the CHRONOGRAPH 1/10-second hand at 3
and 9 o’clock sides of the small dial. In that case, check if the hand is level with its
both ends pointing to those “0” positions.
● When setting the minute hand, first advance it 4 to 5 minute ahead of the desired time
and then turn it back to the exact minute.
To Next Page
Loading...
