EasyManua.ls Logo

Pulsar W620 - Battery Change Procedures; Battery Life Indicator and Replacement; Post-Battery Change Reset

Pulsar W620
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Battery life : Approx. 2 years
Battery : SEIKO CR1620 (Cal. W240)
SEIKO CR2025 (Cal. W620, W650)
BATTERY CHANGE
2
Years
The battery life may be less than 2 years if the alarm is used for more than 10 seconds
(Cal. W240) / 20 seconds (Cal. W620, W650) a day and/or the illuminating light more than
2 times (Cal. W240) / 3 times (Cal. W620, W650) a day.
As the battery is inserted at the factory to check the function and performance of the
watch, its actual life once in your possession may be less than the specified period.
When the battery expires, be sure to replace it as soon as possible to prevent any malfunction.
We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
Battery life indicator
When all the digits start flashing, have the battery replaced with a new one as soon as
possible.
Necessary procedure after battery change
After the battery is replaced with a new one, or if an abnormal display (broken digits, etc.)
appears, follow the procedure below to reset the IC.

Related product manuals