Pulsar W860 - Notes on Time;Calendar Usage; Time;Calendar Setting Procedures

28
English
NOTES ON USING THE WATCH
TIME/CALENDAR MODE
[TIME/CALENDAR SETTING]
l
The calendar automatically adjusts for odd and even months including February of
leap years from 2007 to 2099.
l
Once the year, month and date have been set, the day of the week is automatically
set.
l
Setting the seconds:
• With the second digits flashing, press button C or D in accordance with a time
signal. The second digits are reset to “00”.
• When the seconds count any number from “30” to “59” and button C or D is
pressed, one minute is added and the seconds are reset to “00”.
l
The flashing digits except the seconds and 12-/24-hour indication move quickly if
button C or D is kept pressed.
l
If the watch is left untouched with the digits flashing, it will automatically return to
the TIME/CALENDAR mode in 2 to 3 minutes.
l
Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons C and D are pressed at the same time. This is not a malfunction. Press any
one of the buttons to return to the TIME/CALENDAR mode, and then set the time/
calendar again.