Pulsar Z021 User Manual

English
English
54
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1
Turn Crown counterclockwise until you no
longer feel the threads turning.
2
Crown can be pulled out.
1
Push Crown back in to normal position.
2
Turn Crown clockwise while pressing it
lightly until tight.
Unlocking the crown
TIME/CALENDAR MODE
• Theanalogueanddigitaldisplaysareseparatelyillustratedinthefollowingsections
ofthismanual.
CROWN
Pull out when the second hand is at
the 12 o'clock position.
The second hand will stop on the spot.
Turn to set the hour and minute
hands to the correct time.
Push back simultaneously with a time
signal.
ANALOGUE TIME SETTING
NPSC47_E.indd 4-5 13/06/14 9:55

Pulsar Z021 Specifications

General

Brand	Pulsar
Model	Z021
Category	Watch
Language	English